Vertical Flap Discs

Product Data:

 Name Vertical Flap Discs
 Material Premium Aluminium Oxide
 Backing Nylon Backing (Fiberglass Backing Available)
 Type T27
 Diameter 4”
 Grit #60, #80, #120
CodeTypeSize in mmSize in InchGritPagesMax SpeedMax. RPM
VP100#60T27100 x 16.34" x 5/8"608080 m/s15200
VP100#80T27100 x 16.34" x 5/8"808080 m/s15200
VP100#120T27100 x 16.34" x 5/8"1208080 m/s15200

Vertical Flap Discs are kinds of expendable fiber coated with abrasive cloth. The disc is mainly used for grinding and polishing the round and planar surfaces of workpiece while the shapes can not be changed.

The straight vertical flaps design prevents dusts & debris from sticking on the sandpaper, saving the polishing time and saving the cost.

The backings can be fiberglass backings or plastic backing. Vetical Flap Discs with Plastic backing is relatively more popular.

Broad grit range allows rough grinding to fine finishing. There are only flat (T27) type for this Vertical Flap Disc. Flat (T27) is designed to grind edges and flat surfaces with a working angle of 0°to 15°degrees.

Size In mmInner BoxCartonCarton Size(cm)G.W/kgsN.W/kgs
100×16.310pcs/shrink100pcs55×23×1576
115×22.310pcs/shrink100pcs63×26×1598

Packing:10pcs/shrink, 100pcs/carton, or as per client’s requirement.

Features of Vertical Flap Discs

  • Stock removal and blending in one operation
  • Long service life
  • Uniform coating
  • More flexible
  • Good elasticity and self-sharpening

Vertical Flap Discs are widely used for grinding and polishing the round and planar surfaces of workpiece.

Suitable for the processing of non-ferrous metals, high speed steel, carbon steel and alloyed steel.

If you need to learn more information about us, please check the video introduction of our factory at https://jingle-abrasives.com .