flap discs with plastic backing

Product Data:

 Name Flap Discs with Plastic Backing Pad
 Material Premium Aluminium Oxide
 Backing Nylon Backing
 Type T27
 Diameter 4” – 7”
 Grit #60 – 120
CodeTypeSize in mmSize in InchGritPagesMax SpeedMax. RPM
PCP100#60T27, T29100 x 16.34" x 5/8"607280 m/s15200
PCP100#80T27, T29100 x 16.34" x 5/8"807280 m/s15200
PCP100#120T27, T29100 x 16.34" x 5/8"1207280 m/s15200
PCP115#60T27, T29115 x 22.34 1/2" x 7/8"607280 m/s13300
PCP115#80T27, T29115 x 22.34 1/2" x 7/8"807280 m/s13300
PCP115#120T27, T29115 x 22.34 1/2" x 7/8"1207280 m/s13300
PCP125#60T27, T29125 x 22.35" x 7/8"608080 m/s12200
PCP125#80T27, T29125 x 22.35" x 7/8"808080 m/s12200
PCP125#120T27, T29125 x 22.35" x 7/8"1208080 m/s12200
PCP180#60T27, T29180 x 22.37" x 7/8"6011080 m/s8600
PCP180#80T27, T29180 x 22.37" x 7/8"8011080 m/s8600
PCP180#120T27, T29180 x 22.37" x 7/8"12011080 m/s8600

Flap Discs with Plastic Backing Pad are made with aluminium oxide grain and plastic backing plates.

About the backings:
There are two main materials used: fiberglass and plastic.

Fiberglass backing pad could provide better buffer vibration and low noise. It is also lighter weight and have higher strength than the plastic backing.

Plastic backing is becoming more and more popular. It has better toughness. Some manufacturers suggest that the plastic backing can be trimmed to prolong working life. Also, plastic backing pads are available in different colors to make the flap discs distinguished.

Size In mmInner BoxCartonCarton Size(cm)G.W/kgsN.W/kgs

Packing:10pcs/shrink, 100pcs/carton, or as per client’s requirement.

Features of Flap Discs with Plastic Backing Pad

  • Low noise
  • Long service life
  • Work short time
  • Good elasticity and self-sharpening
  • Fast stock removal
  • Aggressive inox removal

Flap Discs with Plastic Backing Pad are widely used for surface treatment of metal and weld seams and derusting.

Suitable for the processing of carbon steel, alloyed steel, stainless steel, sheet metal, non-ferrous metals, cast iron, heat treated steels and high speed and tool steels.

There is only flat type (T27) for flap discs with plastic backing pads. Flat (T27) is designed to grind edges and flat surfaces with a
working angle of 0°to 15°degrees.

If you need to learn more information about us, please check the video introduction of our factory at https://jingle-abrasives.com .