ceramic flap discs

Product Data:

 Name Ceramic Flap Discs
 Material Premium Ceramic Abrasives Grain
 Type T27, T29
 Backing Fiberglass Backing
 Diameter 4” – 7”
 Grit #40 – 120
CodeTypeSize in mmSize in InchGritPagesMax SpeedMax. RPM
CP100#40T27, T29100 x 16.34" x 5/8"407280 m/s15200
CP100#60T27, T29100 x 16.34" x 5/8"607280 m/s15200
CP100#80T27, T29100 x 16.34" x 5/8"807280 m/s15200
CP100#120T27, T29100 x 16.34" x 5/8"1207280 m/s15200
CP115#40T27, T29115 x 22.34 1/2" x 7/8"407280 m/s13300
CP115#60T27, T29115 x 22.34 1/2" x 7/8"607280 m/s13300
CP115#80T27, T29115 x 22.34 1/2" x 7/8"807280 m/s13300
CP115#120T27, T29115 x 22.34 1/2" x 7/8"1207280 m/s13300
CP125#40T27, T29125 x 22.35" x 7/8"408080 m/s12200
CP125#60T27, T29125 x 22.35" x 7/8"608080 m/s12200
CP125#80T27, T29125 x 22.35" x 7/8"808080 m/s12200
CP125#120T27, T29125 x 22.35" x 7/8"1208080 m/s12200
CP150#40T27, T29150 x 22.36" x 7/8"409080 m/s10200
CP150#60T27, T29150 x 22.36" x 7/8"609080 m/s10200
CP150#80T27, T29150 x 22.36" x 7/8"809080 m/s10200
CP150#120T27, T29150 x 22.36" x 7/8"1209080 m/s10200
CP180#40T27, T29180 x 22.37" x 7/8"4011080 m/s8600
CP180#60T27, T29180 x 22.37" x 7/8"6011080 m/s8600
CP180#80T27, T29180 x 22.37" x 7/8"8011080 m/s8600
CP180#120T27, T29180 x 22.37" x 7/8"12011080 m/s8600

Ceramic Flap Discs are created by overlapping coated abrasive flaps and adhering them firmly to a back-up plate.
Cooler cutting and more durable than natural aluminum oxide products, the flap discs provide maximum life while dissipating heat.
This ceramic grain can be used for wet grinding and dry grinding, but it will not burn the workpiece.
They are better than zirconium oxide in every respect(better surface finishing, longer using life and cost-effective).

[table “113” not found /]

Packing: 10pcs/shrink, 200pcs/carton or as per client’s requirement.

Features of Ceramic Flap Discs:

  • Low noise
  • Long service life
  • Work short time
  • Good elasticity and self-sharpening
  • Fast stock removal
  • Cooler cutting and more durable

Shape Recommendation:

Flat flap disc(Type 27): Type 27 Flat flap discs have a flat flap design and provide the best finish. Used primarily on flat surfaces they grind at flatter angles 0° to 15°. T27 Abrasive Flap Discs are the he best choice for blending and smoothing finishing.
Conical flap disc(Type 29): Conical T29 flap discs have angled flaps and may be used on both contoured and edge work. Type 29 Abrasive flap discs are the more aggressive choice, with flaps angles at 10°. Grind at steep angles 15° to 25°. The angle provides greater surface contact for stock removal on flat surfaces. T29 Abrasive Flap Discs are the best choice when speed and stock removal are primary considerations.

Recommended Application: 

Ceramic Flap Discs are excellent choices for aggressive stock removal on hard materials.
Suitable for the processing of carbon steel, high-alloyed steel, stainless steel, chrome, cast iron, nickel steel, non-ferrous metals.

If you need to learn more information about us, please check the video introduction of our factory at https://jingle-abrasives.com .